跳至主要内容

What production equipment is needed to produce disposable disinfectant gel?

As everyone knows, the current epidemic in China has been basically brought under control, but we still cannot take it lightly. We must do a good job of personal protection when we go out. Therefore, the disposable disinfectant gel has become an indispensable personal protection tool when we go out. So do you know what equipment is used to produce the disposable disinfectant gel? The following editor will introduce the equipment produced by Yekeey for the production of disposable disinfection gel -- SPA series bottom homogenizing external circulation vacuum emulsifying mixer.

The emulsifying mixer unit of SPA series is divided into emulsifying tank and control cabinet. The emulsifying tank is composed of a tank body, a two-way mixing system, a bottom homogenizer, and a vacuum system.
Working Principle
 The material is fed into the main boiler by the rotor pump through the conveying pipeline.
The material continuously produces new interfaces through the scraper stirred in the pot, and then cuts, compresses, and folds the material mixing through the two-way agitator and flow down to the homogenizer below the pot body, and then through the strong shearing, impact, turbulence and other processes generated between the high-speed rotating rotor and the stator, the material is cut in the shearing gap. It can be returned to the tank through the pipeline and repeatedly cut and quickly broken into particles of 200nm～2μm. The micronization, emulsification, mixing and dispersion of materials can be completed in a short time. Because the homogenizer is in a vacuum state, the air bubbles generated when the materials are stirring in the process are pumped away in time. After the mixing, the materials in the pot are input into the storage tank by the rotor pump through the pipeline.
The heating temperature of the stirring pot is set and adjusted by the temperature controller on the control panel; the stirring system and the bottom homogenizer can be used separately; they can also be used at the same time; the length of the stirring time is controlled by the user according to the properties of the materials. After the work is completed, the cleaning ball valve can be opened to clean the pot.
The above is the introduction to the bottom homogenizing vacuum emulsifying mixer of the SPA series. If you need to know more or purchase the production equipment of disposable disinfection gel, you are welcome to consult our sales at any time.
more about gel production equipment go to www.yekeey.com.

评论

发表评论

此博客中的热门博文

Brief Introduction and Advantage of Laboratory high shear homogenizer

  Brief Introduction LR-5 high shear mixer series is the most popular machine in our laboratory mixer series. It is the ideal choice for routine laboratory work, R&D, QA analysis and small-scale production in all industries. LR-5 high shear mixer series has a wide range of industrial applicability, through the replacement of stator and rotor, it can easily achieve mixing, homogenization, emulsification, dispersion, dissolution and other functions, which is incomparable with other similar equipment efficiency and flexibility. In addition, the LR-5 high shear mixer series is equipped with special on-line hybrid modifications, which can provide experimental data for large-scale continuous production. Advantage   All SUS304 food-grade stainless steel shell, corrosion-resistant, easy to clean, easy to handle. With servo motor, the speed can be adjusted arbitrarily in the range of 600-8000rpm, and with feedback device, the speed is stable and reliable, which can be used for refe...
发表评论
阅读全文

Bottom homogeneous vacuum emulsifier for laboratory dispersion and emulsification

  A customer inquired about the laboratory emulsifier   a year ago. During the consultation, the customer emphasized that it must be a bottom homogeneous vacuum emulsifier . Because scale-up production requires the use of a bottom homogeneous vacuum emulsifier, the laboratory should be consistent.   After docking their specific process requirements with the customer, we recommended the ZJR-5 laboratory   bottom homogeneous vacuum emulsifier to the customer and quoted it.   Through the quotations and communication comparisons of many emulsifier manufacturers , the customer felt that this laboratory bottom homogeneous   emulsifier from YeKeey was more cost-effective, and the communication with the sales engineer was smoother, so he chose this customized ZJR-5 laboratory bottom homogeneous emulsifier. The equipment is now completed and ready to ship!    The ZJR-5 laboratory bottom homogeneous   vacuum emulsifier   is dexterous and convenien...
发表评论
阅读全文

High-speed shear laboratory homogenizer sent to the Russian pharmaceutical laboratory

  Recently, a Russian customer consulted the laboratory homogenizer on the Yekeey’s official website. The customer asked us if Yekeey had the smallest volume/lower size 2L of homogenizer, the material requirement was SUS316L, and the button control was needed. They will apply this equipment to the pharmaceutical laboratory, R&D trials for low-dose drugs. After receiving the customer's request, the business staff responded to the customer in the first time, and confirmed the technical requirements and details of some requirements to the customer. Finally, the customer selected the high-speed shearing laboratory of the Yekeey LR series. The LR-5 small laboratory homogenizer has a maximum/small throughput of 300ml and can handle up to 5L of material. It is ideal for pharmaceutical QA analysis and small-scale production. With servo motor, the speed can be adjusted arbitrarily within the range of 600-8000 rpm, and with feedback device, the speed is stable and reliable, which can be ...
发表评论
阅读全文